SMOK ALIEN 220W MOD AND TFV8 BABY STARTER KIT
Quantities available for this product:
- SILVER WITH SILVER STRIPE : 0
- BLACK WITH ORANGE STRIPE : 0
- BLACK WITH CHAMPAGNE GOLD STRIPE : 0
- BLACK WITH RED STRIPE : 0
- BLACK WITH GUN METAL STRIPE : 0
- BLACK WITH BLUE STRIPE : 0
- WHITE WITH RED STRIPE : 0
- RAINBOW WITH BLACK STRIPE : 0
- PURPLE WITH WHITE STRIPE : 0
- RED AND GOLD : 0
- GREEN AND GOLD : 0
- RED WITH BLACK STRIPE : 0
- BLUE WITH RED STRIPE : 0
- BLUE WITH BLACK STRIPE : 0
- CAMO YELLOW : 0
- CAMO BLUE : 0
- BLACK WITH PURPLE STRIPE : 0
- BLACK WITH RAINBOW STRIPE : 0
- BLACK WITH GREEN STRIPE : 0
- BLACK WITH WHITE SPLATTER : 0
- BLACK WITH RED SPLATTER : 0
- GREEN WITH BLACK SPLATTER : 0
- BLACK WITH RAINBOW SPLATTER : 0
- RED WITH BLACK SPLATTER : 0
- GREEN WITH RED SPLATTER : 0
- RED CAMO : 0
- PINK / BLACK : 0
- CAMOUFLAGE : 0
MORE DETAILED VAPING DATA
The clear and precise OLED screen offers an entirely new operation interface. More vaping data for you, such as VW/TC MODE, vaping effect, voltage, battery life, resistance value etc.
Tips: There is a transparent protective layer on this side, you can rip it
ADJUSTABLE AIRFLOW SYSTEM
Bring you an extremely open draw. Airflow can be adjusted freely by turning the ring at the base of atomizer.
THE KIT INCLUDES
HOW TO BUILD THE RBA
1. Before starting, make sure your hands are clean.
2. Take RBA deck apart.
3. Install and position the pre-wrapped coil. Place the coil between the posts and wrap the ends around the screws and tighten up, once all is in place, make sure the coil is fixed in the center and lined up with the air hole, and also make sure the coil is NOT touching the base.
4. Cut the excess ends of the wire off.
5. Cut a strip of cotton and make sure it’s not too much and not too little.
6. Insert the cotton and placing it in the middle of the coil.
7. Cut the cotton at an angle and make sure it’s not too short and not too long.
8. Wet the coil with your e-liquid and adjust the cotton.
Warning: Coils must be checked for resistance before they are fired on a device, and re-checked periodically to ensure the resistance remains the same.
ALUR SLIK ULTRA PORTABLE POD SYSTEM STARTER KIT
The ALUR Slik Ultra-Portable Pod System presents a dynamic card-style open POD SYSTEMS, featuring a 400mAh integrated battery with 2mL maximum pod cartridges. Streamlined in a beautiful rectangular chassis, the ALUR...
ARTERY X TONY B. PAL II (2) AIO POD SYSTEM STARTER KIT
The Artery PAL II AIO Kit is made in collaboration with Tony B., crafting a 1000mAh rechargeable battery pod system with 3mL refillable pod cartridge integrating two types of coils - 0.6ohm...
ASPIRE BREEZE 2 II AIO ALL IN ONE POD STYLE STARTER KIT
The ASPIRE Breeze 2 AIO Ultra Portable Pod Kit is the upgraded rendition to the original Breeze AIO, presenting a phenomenal pocket-friendly device with dual activation mechanism and a larger 1000mAh rechargeable...