FREE SHIPPING ON ALL ORDERS OVER $500!

ELEAF ELLO, IKONN, SAUROBOX, & PICO 25 HW SERIES HEAD REPLACEMENT COILS HW1, HW2, HW-N, & HW-M OPTIONS 5PK

$ 6.45

Quantities available for this product:

HW1 SINGLE CYLINDER 0.2OHM : 6
HW2 DUAL-CYLINDER 0.3OHM : 0
HW-N 0.2OHM NET COILS : 0
HW-M 0.15OHM NET COILS : 0

Description

Eleaf HW Atomizer Head - Pack of 5

Replacement Coil / Atomizer Head for ELLO, ELLO Mini, ELLO Mini XL, iKonn Total, SAUROBOX, and iJust NexGen

Replacement atomizer head for:

Eleaf iKonn Total Starter Kit
Eleaf Saurobox Starter Kit
Eleaf Pico 25 Kit
Eleaf iJust NexGen Starter Kit
Eleaf iKonn 220 Starter Kit
ELEAF INVOKE STARTER KIT

Product Specifications:

HW1 0.2 ohm Coil
- Single Parallel Coil
- 40 to 80W
HW2 0.3 ohm Coil
- Dual Parallel Coil
- 30 to 70W
HW3 0.2 ohm Coil
- Triple Parallel
- 50 to 130W
HW4 0.3 ohm Coil
- Quadruple Parallel
- 40 to 110W
HW-N 0.2 ohm Coil
- 50 to 130W
- Net Coil
- Kanthal
HW-M 0.15 ohm Coil
- 50 to 100W
- Net Coil
- Kanthal

Tip for new users: We strongly suggest 6mg eLiquid or lower with this atomizer. Sub-ohm atomizers produce higher throat hit than low and standard resistance atomizers. Using this atomizer with a nicotine level above 6mg will usually taste burnt or harsh.

Warning: These coils are sub-ohm resistance. These coils should only be used by experienced users. Extra safety precautions should be practiced when using a sub ohm tank. These coils will only work on a mechanical mod or a regulated mod capable of firing sub ohm atomizers and coils. For example, if you have a 0.3ohm coil, your mod must be able to fire atomizers of 0.3ohm or lower. You must be also ensure that your batteries can handle sub ohm atomizers and coils. If you're using a regulated mod, make sure it can handle the amps. Improper use can lead to injury or damage. For mechanical mod users, please use 20 Amp batteries or higher. Use the OHMS LAW CALCULATOR, CHECK YOUR AMPS, and be safe! Any questions please contact us by email.

Package Contents:

5 x Atomizer Heads

Share: