ASPIRE NAUTILUS BVC COIL GLASS ATOMIZER CLEAROMIZER TANK WITH ADJUSTABLE AIR FLOW

The Aspire Nautilus glassomizer is a revolutionary design based on feedback of seasonved vapers of what an ideal tank should be. Utilizing this information, the engineers have created a new tank that provides optimal performance in vaping functionality.The Nautilus has an exclusive adjustable airflow design so that with a simple turn of the lower ring, you can increase or decrease the airflow to realize your perfect vape. With the option of different sized air-ports, it allows the user to produce big clouds of vapor, with a pure and clean taste. The unique Nautilus four-port system allows you to differentiate how hard or soft the draw, how warm or cool the vape is, and how much vapor is produced.

GET REPLACEMENT (ORIGINAL NAUTILUS) COILS HERE

GET TRITON MINI COILS (ALSO COMPATIBLE) HERE

GET REPLACEMENT GLASS HERE

GET REPLACEMENT HOLLOWED OUT METAL / GLASS TANK HERE

GET REPLACEMENT METAL TANK HERE

Key Features:

• Stainless Steel
• Adjustable Airflow Control
• 5ml Capacity
• Threaded pyrex glass tube
• BVC (Bottom Vertical Coil) Technology

Airflow Features: Each rotation for air hole adjustment has a click to let users know the desired port size

• Ø0.9mm
• Ø1.1mm
• Ø1.4mm
• Ø1.8mm

Parameters:

• Height of  Nautilus Tank System:83.65mm
• Max Diameter of Nautilus Tank System:23.45mm
• Height of Nautilus Replaceable Coil :25.7mm
• Max Diameter of Nautilus Replaceable Coil :10mm
• Max Diameter of Nautilus Replaceable Coil :10mm

Resistance of Aspire BDC:

• 1.6ohm  (3.3v-5.0v)
• 1.8ohm (3.3v-6.0v)

Aspire Nautilus Glassomizer Kit comes with:

• 1x Full Aspire Nautilus Tank (1.6ohm BvC installed)
• 3x Extra Aspire Nautilus BVC coils
• 1x eGo Adaptor
• 1x User Manual

Note: The Aspire Nautilus replacement coil heads will only work with its own designed version. The standard Aspire BDC coil heads are not compatible.

How to Use your Aspire BvC:

• To fill, turn the tank upside down and remove the threaded end cap.  Fill the outer portion of the tank (avoid getting e-liquid into the center airflow tube) and then screw the end cap back onto the tank tightly.  You can now turn it rightside up and check for leaks before using.
• Gurgling or Leaking can occur if liquid gets into the center airflow tube.  To clear this liquid and improve performance remove the tank from the battery and blow through the mouthpiece into a paper towel.  The excess liquid will come out of the threaded end of the device.  If this happens often you may need to check that all connections are screwed down tightly or replace the head and wick assembly with a new one.
• The head and wick assembly will sometimes loosen itself when the threaed end cap is unscrewed.  Always check that it is pushed into the bottom cap tightly tightly before screwing the cap back on.  Not doing so could result in a leaking or non-working device.
• You should never run the tank completely dry.  Doing so could result in a burnt or damaged wick and can cause leaking.  Refill the tank when the liquid level reaches approximately 1/3 full
• The lifespan of replacement heads can vary quite a bit, but following the above instructions will maximize the lifespan of the coil.